Pick a parcel, say what you want in plain words, and a dimensioned concept plan draws itself to the property line: streets tied into the roads already there, lots, buildings, parking, sidewalks and planting, held clear of the ground you cannot build on. Edit it on the map, then hand it off as editable layers, a layered DXF or a scaled plan sheet.
- Site
- A real parcel
- Building type
- Single-family homes
- For sale
- Access
- 2 entrances
- marked on map
Describe your vision
A brief in plain words, a plan to real design rules
Mark the entrances, pick the building type, and describe the rest the way you would to a planner. The brief is written for your site, and a deterministic layout engine draws every line to real standards: setbacks, lot sizes, street radii, stall dimensions, ADA counts.
- Homes, townhomes, apartments, commercial, industrial, data centers, and property plans from an ADU to a pool
- Streets meet the roads and stub-outs already there, at the entrances you mark
- Upload your submittal requirements and every one is checked on the plan
It reads the ground before it draws
Wetlands, floodplain, open water, steep slopes, easements, utilities and existing structures are sensed from the data on your map and held out before a lot is cut. Terrain is read from elevation data, and stormwater is sized and placed on the low ground.
- Restricted areas sensed from your map layers and open data, or drawn by hand
- Relief, mean and maximum slope, and grading notes from real elevation
- Yield reported net of detention, with the land budget itemized
Edit it on the map, then hand it off
Drag, resize or reshape anything on the map, divide a block, or change a dial and the plan re-flows in seconds without spending a generation. Red-line what should change and ask for a redraw. Every version is kept, so you can ghost the last one under the new one and lock the one you presented.
- Review studio: yield, findings, lot table, plant schedule, versions and compare
- Explore alternative arrangements of the same design and adopt the best
- Accept into editable layers, then export a layered DXF in real ground coordinates or a scaled plan sheet
How it works
Three steps, start to finish
1
Pick the site
Tap a parcel, or draw the boundary anywhere on the map, and mark where traffic enters.
2
Describe what to build
Choose the building type and write the rest in plain words.
3
Review, edit, hand off
Edit the plan on the map, then accept it into layers and export DXF or a plan sheet.
Draft your first site plan
Pick a parcel, describe what to build, and watch a dimensioned plan draw itself on it.
Or skip the tour. Type any address.
Opens the live map at that exact spot. No account, no install.