Guide
Site plan for a pool permit
Pool permit applications commonly need more than the water's outline. The site plan shows the pool, the deck around it, and the barrier that encloses both.
What the site plan shows
What permit desks commonly ask for. Your local permit office decides what drawings, survey and setbacks it needs.
- The property lines, with their lengths.
- Every building already on the lot, and the driveway.
- The new structure, with its outside dimensions.
- The distance from the new structure to each property line and to the house.
- Easements and utility lines that cross the lot.
- A north arrow and the scale.
- The deck around the water, and the barrier with its gates.
- Where the pool equipment sits.
How Site Plan AI draws a pool
- A 16 by 32 ft pool by default, close behind the house.
- To start, a 4 ft deck around the water, and a 48 inch barrier 2 ft outside the deck.
- To start, 10 ft from the side and rear lines.
- These sizes and distances are starting values you can change, not your local requirement. Paste or upload your city's requirements and the plan is checked against the ones it can measure, such as setbacks.
The model code
Cities and states adopt the model codes and often amend them, so your permit desk has the final word.
International Swimming Pool and Spa Code (2021), section 305.2.1
The top of a residential pool barrier is at least 48 inches above grade, measured on the side away from the pool.
Read the section