Guide
Site plan for a shed permit
Most cities that ask for a shed permit ask for one drawing: the lot, the house, and the shed, with the distances between them. Here is what goes on it, and a real one.
What the site plan shows
What permit desks commonly ask for. Your local permit office decides what drawings, survey and setbacks it needs.
- The property lines, with their lengths.
- Every building already on the lot, and the driveway.
- The new structure, with its outside dimensions.
- The distance from the new structure to each property line and to the house.
- Easements and utility lines that cross the lot.
- A north arrow and the scale.
- The shed's height, where your city limits it.
How Site Plan AI draws a shed
- A 10 by 12 ft shed by default, sized to what you ask for.
- Behind the front of the house, clear of the house and anything else already built, and to start 5 ft from the side and rear lines.
- Off any marked utility easement.
- These sizes and distances are starting values you can change, not your local requirement. Paste or upload your city's requirements and the plan is checked against the ones it can measure, such as setbacks.
The model code
Cities and states adopt the model codes and often amend them, so your permit desk has the final word.
International Residential Code (2021), section R105.2, Building item 1
A one-story detached accessory structure used for storage, with a floor area of 200 square feet or less, is exempt from a building permit. Local adoption varies: your city may use another edition or have amended the section, and zoning setbacks still apply.
Read the section